How to make a Tassel earrings


Tassel Earrings



      • Machine Embroidery thread 100% polyester (sew-ology) or coats;
      • 1 strand of iris thread;
      • clear coat;
      • pair of wire cutters;
      • pair of pliers;
      • round nose micro pliers;
      • scissors;
      • scotch tape;
      • thin winding board;
      • thick sewing needle;
      • beading needle;
      • 2 jump rings.

Tassel Beaded Earrings

 To make a tassel you need very thin Machine Embroidery thread 100% polyester only. Not the cotton. The thread must be as thin as our hair and have a silk consistence. You also need a winding board. I used a lid off a wooden box which is 3 3\4” wide. So, tassel will be 3 3\4” long.

Tape the end of the thread to the board.

Wind thread around the board in taut loops 200 times. Tape the end of the thread and cut the thread.

Do the same one more time on the other side of the board, tape and cut the thread.


Use a thick needle placed under the thread as shown. Thread your beading needle with matching color of iris thread. Go under the strands.

Loop back and go under the strands one more time.

Pull it tight. I divided and marked the board in half on both sides. The tie should be right on this line.

Make a square knot.

Using a clear nail polish put a little drop on the knot and let it dry out.


Repeat with the second tassel.
Up to 60% OFF on Exquisite European Beads, Create Fashion for EverY Woman!

Turn over the board.

Using a very sharp knife cut both strands right in the middle.

Cut off the ends of the iris thread on the top.

Fold the tassel in the half. Cut a new piece of iris thread about 6” long.

Make 2-3 taut loops around the tassel. Tie a square knot. Put 2-3 drops of the clear coat. Let it dry and cut it.

Open a jump ring. Pull the rind through the loop on the top. Close the jump ring.

You can gently brush the tassel, then straighten the strings using your hair straightener. It will take 2-3 times with low temperature.

Repeat this with the second tassel. Use your sharp scissors to cut the straight bottom line for the tassel. If you’ve done everything correct there will not be a lot to cut.

















Customizing and Beautifying Your Watch Band

There are many types of electronic devices around us today, but I still love my classy old style analog wrist watch.  Only with a little addition – I would like to make them more custom looking. I’ve decide to decorate it. Continue reading

Bracelet with Beaded Cups


  • 4 size 8mm Sw pearls black
  • 32 size 4mm bicones black
  • 64 size 4mm bicones crystal
  • 8 size 4mm SW pearls bronze
  • 11\0 seed beads black\silver
  • 2 bead tips
  • Clasp

Continue reading

Silky Beads Projects

If you want to create something new using silky beads I can give you a little vision of what it might be.

Silky beads have a square shape, size 6×6 mm. It is a pressed glass bead with two parallel holes drilled diagonally through the side of the bead.

Silky beads may be look similar with Miyuki Tila beads, but they are not the same. Continue reading

Simple Beaded Bead

There are many different types of beaded bead projects. My goal was to create a bead I can use with a leather cord. It should be empty inside with a hole for stringing on the cord. I used them for decorating a necklace. Continue reading

Christmas Tree Earrings


4mm faceted beads ( red, green and crystal clear)

11\0 seed beads gold and green

6\0 seed beads gold

Beading needle


2 ear wires


This Christmas Tree Earrings are easy and fun to make. Continue reading

Seed beaded chain

Designers and their work give you great inspiration. You want to create something similar.  The first steps are the most exciting but can be confusing. You have to understand how the pattern works and why the size and shape of beads are so important. It can be difficult to make the first step if you do not have any experience. First you should explore every little detail of beading and then create something new. Continue reading